IBM DCS3860, Инструкция по установке, использованию и обслуживанию

Страница: 124 / 204

Replacing the memory cache DIMM
Attention: To avoid damage to the DIMM, you must first remove the memory
cache battery and wait for a specified time before you install or remove the DIMM.
Attention: To avoid overheating the storage enclosure and causing damage to its
components, replace failed parts within 10 minutes. The Recovery Guru in the
Storage Manager software identifies failed parts.
Use these procedures if you are replacing a failed DIMM or if you are removing
and installing the DIMM as directed in “Replacing a controller” on page 80.
The following illustration shows the location of the memory cache DIMM.
Replacing the bezel
Before you begin, ensure that you wear an anti-static wrist strap.
Complete the following steps to remove and replace the bezel on the front of the
storage expansion enclosure. You must remove the bezel before you can access the
drives drawers and disk drive modules.
1. At the front of the storage expansion enclosure, remove the bezel by pressing
inward on the latches (see Figure 53 on page 107).
Memory cache DIMMs (three)
dcsi0074
Figure 52. Memory cache DIMM location
106
IBM System Storage DCS3860 Storage System: Installation, User's, and Maintenance Guide