IBM DCAS-32160 - Ultrastar 2.1 GB Hard Drive, Технические характеристики

Страница: 221 / 232

nated without altering the medium. If an invalid parameter is found in parameters supplied
as data, then the file might have altered the medium.
6h Unit Attention
Indicates that the file entered in the 'Unit Attention Condition'. (See 11.1.5, “Unit Atten-
tion Condition” on page 189.)
7h-8h Not used
9h Vendor Specific
Ah Not used
Bh Aborted command
The file aborted the command.
Ch-Dh Not Implemented
Eh Not Used
Fh Reserved
12.2.5 Information Bytes (Byte 3 thru 6)
This field is only valid when Valid Bit is one.
ILI = 0 : This field contains the unsigned LBA associated with the sense key. The LBA reported will be
within the LBA range of the command as defined in the CDB.
Note: An LBA other than the command LBA may be reported on the Reassign Block (07h)
command.
ILI = 1 : This field contains the difference (residue) of the requested length in bytes. Negative values are
indicated by two's complement notation.
12.2.6 Additional Sense Length (Byte 7)
Indicates the remaining number of bytes in the sense data. (It is always set to 18h.)
12.2.7 Reserved (Byte 8-11)
SCSI SENSE D A T A
207