IBM BladeCenter HS20, Инструкция по установке и эксплуатации

Страница: 48 / 88

that all components are installed and seated correctly and that you have not left
loose tools or parts inside the blade server.
4. Pivot the cover to the closed position, as shown in the illustration, until it clicks
into place.
Installing the blade server in a BladeCenter unit
The following illustration shows how to install the blade server into Bladecenter type
8677. The appearance of your BladeCenter unit might be different, see the
documentation for your BladeCenter unit.
Release handles
(open)
To install a blade server in a BladeCenter unit, complete the following steps.
Statement 21:
CAUTION:
Hazardous energy is present when the blade server is connected to the power
source. Always replace the blade cover before installing the blade server.
1. Read the safety information beginning on page v and “Installation guidelines”
on page 21 through “Handling static-sensitive devices” on page 21.
2. If you have not done so already, install any options that you want, such as
SAS drives or memory, in the blade server.
3. Select the bay for the blade server.
Notes:
a. When any blade server or option is in blade bay 7 through 14 (in a
BladeCenter unit) or in blade bays 5 through 8 (in a BladeCenter T unit),
power modules must be present in all four power-module bays.
b. To help ensure proper cooling, performance, and system reliability, make
sure that each of the blade bays on the front of the BladeCenter unit has a
blade server, expansion unit, or filler blade installed. Do not operate the
system unit without either a blade server, expansion unit, or filler blade
installed in each blade bay for more than 1 minute for a BladeCenter unit
or 20 minutes for a BladeCenter T unit.
4. Make sure that the release handles on the blade server are in the open
position (perpendicular to the blade server).
36
BladeCenter HS20 Type 7981: Installation and User’s Guide