IBM Aptiva 2140, Техническое обслуживание оборудования

Страница: 9 / 212

Notices
References in this publication to IBM products, programs, or services do not
imply that IBM intends to make these available in all countries in which IBM
operates. Any reference to an IBM product, program, or service is not
intended to state or imply that only IBM’s product, program, or service may
be used. Any functionally equivalent product, program, or service that does
not infringe any of IBM’s intellectual property rights or other legally
protectable rights may be used instead of the IBM product, program, or
service. Evaluation and verification of operation in conjunction with other
products, programs, or services, except those expressly designated by IBM,
are the user’s responsibility.
IBM may have patents or pending patent applications covering subject
matter in this document. The furnishing of this document does not give you
any license to these patents. You can send license inquiries, in writing, to
the IBM Director of Commercial Relations, IBM Corporation, Purchase, NY
10577.
Voltage Supply Switch Settings
Your IBM Aptiva Personal Computer might have voltage switches, which
must be set correctly for your voltage supply. If your monitor or system unit
has a voltage switch, complete these steps to make sure each switch is set
correctly:
1. Determine the correct voltage switch setting for your area:
2. Locate the voltage switch on the back of your monitor or system unit. If
the setting shown on the switch is:
Correct, start setting up your IBM Aptiva computer.
Incorrect, change the voltage switch setting. (You may need a
small screwdriver.)
Voltage Supply
Range
Voltage Switch
Setting
100–127 V 115 V or 115
200–240 V 230 V or 230
Copyright IBM Corp. 1997, 1998
vii
Get user manuals: See SafeManuals.com