IBM Aptiva 2140, Техническое обслуживание оборудования

Страница: 86 / 212

Table 2-1 (Page 20 of 23). POST and Diagnostics and Utilities Index
for Symptoms, Messages, Error Codes, or Beeps
Symptoms, Messages, Error
Codes, or Beeps Action/FRU
11XX - Serial port test errors not
listed above. Test using a wrap plug while running
Diagnostics and Utilities.
“Diagnostics and Utilities Device Presence
Test” on page 2-43.
Serial adapter card, if installed
System Board
On the system board:
1780/1790 - Hard Disk Drive 0
1781/1791 - Hard Disk Drive 1
1782/1792 - Hard Disk Drive 2 or
CD/DVD-ROM drive
1783/1793 - Hard Disk Drive 3 or
CD/DVD-ROM drive
if Hard Disk Drive 2
installed
Hard disk drive connection/cable/jumpers.
If an upgrade processor is installed, check
that the proper speed has been set
(switches and Setup Utility). Speed should
be a multiple of the original processor
speed.
Hard disk drive size set correctly in Setup
Utility.
Hard disk drive
System Board
17XX - Hard disk drive error.
(All 17XX errors not listed above)
“Factory-Installed Drive Devices” on
page 2-47.
Hard disk drive jumpers
Hard disk drive connection/cable
Hard disk drive
System Board
Power Supply
1800 - PCI Error (IRQ not
available). A PCI adapter card has requested a
hardware interrupt that is not available.
1. Choose ISA Legacy Resources from
the Setup Utility main menu, and make
sure the interrupt resources (IRQ)
setting for ISA legacy adapter cards
are correct. If the interrupt resources
settings are not correct, change the
settings. See “Using the Setup Utility”
on page 1-18.
2. If all interrupts are being used by ISA
legacy adapter cards, you might need
to remove an ISA card to make
memory available to the PCI adapter
card.
2-30
Get user manuals: See SafeManuals.com