IBM AIX HACMP, Руководство пользователя по оборудованию

Страница: 151 / 240

Cluster Testing
133
• Check that all interfaces communicate (
ping <ip-address>
or
ping -R
<ip-address>).
• List the arp table entries with
arp -a
.
• Check the status of the TCP/IP daemons (
lssrc -g tcpip
).
• Ensure that there are no bad entries in the /etc/hosts file, especially at the
bottom of the file.
• Verify that, if DNS is in use, the DNS servers are correctly defined (
more
/etc/resolv.conf)
.
• Check the status of NIS by typing
ps -ef | grep ypbind
and
lssrc -g yp.
• The command
exportfs
shows non-HACMP controlled NFS exports.
• Run
snmpinfo -m dump -o /usr/sbin/cluster/hacmp.defs address
show
snmp information for Cluster network addresses (including the serial
interfaces).
6.1.5 LVM State
• Ensure that the correct VG's are defined, that quorum and auto-varyon are
correctly defined, and that the shared VG's are in the correct state (
lsvg
and
lsvg -o
).
• Check that there are no stale partitions (
lsvg -l)
.
• Check that all appropriate file systems have been mounted and that none
of the rootvg file systems are full (
df -k
).
• Check that PVid's have been assigned where necessary and that there
are no ghost disks(
lspv
).
• Verify that all entries in the /etc/filesystems file are correct and that there
are no erroneous entries (
more /etc/filesystems
and
lsfs
).
6.1.6 Cluster State
• Check the status of the cluster daemons by issuing
lssrc -g cluster
and
lssrc -g lock
.
• Run
/usr/sbin/cluster/clstat
to check the status of the cluster and the
status of the network interfaces.
• Check the cluster logfiles with
tail -f /tmp/hacmp.out
,
more
/usr/sbin/cluster/history/cluster.mmdd
(mmdd = current date),
tail -f
/var/adm/cluster.log
and
more /tmp/cm.log
.
• Check that the nodename is correct (
odmget HACMPcluster)
.