IBM AIX HACMP, Руководство пользователя по оборудованию

Страница: 136 / 240

118
IBM Certification Study Guide AIX HACMP
acquire_service_addr (If configured for IP address takeover.)
Configures boot addresses to the corresponding
service address, and starts TCP/IP servers and
network daemons by running the
telinit -a
command.
acquire_takeover_addr The script checks to see if a configured standby
address exists, then swaps the standby address
with the takeover address.
get_disk_vg_fs Acquires disk, volume group, and file system
resources.
node_up_remote Causes the local node to release all resources
taken from the remote node and to place any
concurrent volume groups in concurrent mode.
Some of the scripts called by node_up_remote
include the following:
release_takeover_addr (If configured for IP address takeover.) Identifies
a takeover address to be released because a
standby adapter on the local node is
masquerading as the service address of the
remote node. Reconfigures the local standby
adapter to its original address (and hardware
address, if necessary).
stop_server Stops application servers belonging to the
reintegrating node.
release_vg_fs Releases volume groups and file systems
belonging to a resource group that the remote
node will be taking over.
cl_deactivate_nfs Unmounts NFS file systems.
node_up_complete This event occurs only after a node_up event
has successfully completed. Depending on
whether the node is local or remote, this event
initiates either a node_up_local_complete or
node_up_remote_complete event.
node_up_local_complete Calls the start_server script to start application
servers. This event occurs only after a
node_up_local event has successfully
completed.
node_up_remote_completeAllows the local node to do an NFS mount only
after the remote node is completely up. This