IBM 88743BU - System x3950 E, Руководство пользователя

Страница: 242 / 426

224
Planning, Installing, and Managing the IBM System x3950 M2
The Redraw button allows you to select the system that should be displayed
first to match the cabled configuration. To redraw the boxes and the serial
numbers, first select the serial number you want to be at the top of the list and
then click
Redraw .
Notes:
– The box on which you are connected is always described as (Local), the
Primary system is always marked by a check mark.
– The sequence of the boxes in the middle section of the panel can change.
This middle section of the Scalable Complex Management section, in
Figure 4-18 on page 220, shows you the health of your partitioned systems. It
provides an overview of the following information, as indicated in Figure 4-24:
򐂰
Scalability ports
򐂰
Scalability cable connection
򐂰
Complex Descriptors
򐂰
Firmware problems
򐂰
Complex and Partition overview
Figure 4-24 RSA II Web interface: complex health
The section on the right side in Figure 4-18 on page 220 (and also shown in
Figure 4-25 on page 225) indicates:
򐂰
System power state
򐂰
Partition state
򐂰
Scalability mode
Partition ID
System ser ial
number
Checkmar k for the
primary server
Scalability p ort :
• Grey = no error on port or cable
connector
•
Red with red x in a circle = the port
name becomes a link; there is a por t
err or
Cable
• Black = good
•
Red = port or cabling error
System box
• Grey = cabled only, no
partition
•
Blue = valid Complex
Descriptor; partition
created
•
Red = Complex
Descriptor could not be
read.
If the system displays
red, it could not be
merged because of the
firmware or scalability
key