IBM 8874 - eServer xSeries MXE 460, Руководство по установке

Страница: 34 / 106

For details about the location and function of the input and output connectors, see
Chapter 3, “Server controls, connectors, LEDs, and power,” on page 31.
Two optional SMP Expansion cable kits are available to interconnect the SMP
Expansion Ports of two or more servers:
v
2.3 m XpandOnDemand
™
Scalability cable kit (comes with one 2.3-m (7.6-foot)
SMP Expansion cable)
v 2.9 m XpandOnDemand Scalability cable kit (comes with one 2.9-m (9.5-foot)
SMP Expansion cable)
The following illustrations show the locations of the input and output connectors on
the server. Detailed cabling instructions are in the Rack Installation Instructions that
come with the server.
Rear view
SP serial
System serial
Keyboard
Mouse
SP Ethernet 10/100
Gigabit Ethernet 2
Gigabit Ethernet 1
USB 1
USB 2
IXA RS 485
Power-supply
Video
SMP expansion port 1
SMP expansion port 2
SMP expansion port 3
Front view
Power-control button
Power-on LED
USB connector
Hard disk drive activity LED
Information LED
System-error LED
Locator LED
Release latch
Updating the server configuration
When you start the server for the first time after you add or remove an internal
option or external SAS or SCSI device, you might receive a message that the
configuration has changed. The Configuration/Setup Utility program starts
automatically so that you can save the new configuration settings. For more
information, see the section about configuring the server in the User’s Guide on the
IBM xSeries Documentation CD.
Some options have device drivers that you must install. See the documentation that
comes with each option for information about installing device drivers.
22
IBM
ERserver
xSeries 460 Type 8872 and xSeries MXE 460 Type 8874: Installation Guide