IBM 8874 - eServer xSeries MXE 460, Руководство по установке

Страница: 31 / 106

e. Close the microprocessor-tray release latch.
f. Reinstall the fans and memory cards in the server.
If you have other options to install or remove, do so now; otherwise, go to
“Completing the installation” on page 21.
Installing an adapter
If you are installing an optional ServeRAID-8i adapter, review the following
information:
v
The ServeRAID-8i adapter can be installed only in a dedicated slot on the PCI-X
board.
v The ServeRAID-8i adapter is not cabled to the server, and no rerouting of the
SAS cables is required.
v
The blue handle that comes with the adapter is required to install the adapter.
v
In multi-node configurations, only two nodes can contain a ServeRAID-8i adapter.
The following illustration shows how to install a ServeRAID-8i adapter.
AC
DC
ServeRAID-8i adapter
ServeRAID-8i
slot
For more detailed instructions or information, see the User’s Guide on the IBM
xSeries Documentation CD.
To install a hot-plug PCI or PCI-X adapter, complete the following steps.
Note: For hot-pluggable adapters, make sure that the PCI hot-plug device driver is
installed. For details, see the documentation that comes with the adapter. For more
Chapter 2. Installing options
19