IBM 8874 - eServer xSeries MXE 460, Руководство по установке

Страница: 60 / 106

3. Follow the prompts to complete the installation.
The installation program prompts you for a TCP/IP port number and an IP
address. Specify an IP address, if you want to limit the connection requests that
will be accepted by the utility program. To accept connections from any server,
type INADDR_ANY as the IP address. Also specify the port number that the utility
program will use. These values will be recorded in the smbridge.cfg file for the
automatic startup of the utility program.
To install the OSA SMBridge management utility program on a server running a
Linux operating system, complete the following steps. You must be logged in as a
root user to perform these procedures.
1. Go to http://www.ibm.com/pc/support/, download the utility program, and create
the OSA BMC Management Utility CD.
2. Insert the OSA BMC Management Utility CD into the drive.
3. Type mount/mnt/cdrom .
4. Locate the directory where the installation RPM package is located and type
cd/mnt/cdrom
.
5. Type the following command to run the RPM package and start the installation:
rpm -i osabmcutil-1.0-i386.rpm
6. Follow the prompts to complete the installation. When the installation is
complete, the utility copies files to the following directories:
/etc/init.d/smbridge
/etc/smbridge.cfg
/ect/sol/oem.cfg
/usr/sbin/smbconfig
/usr/bin/smbconfig
/usr/sbin/ipmish
48
IBM
ERserver
xSeries 460 Type 8872 and xSeries MXE 460 Type 8874: Installation Guide