IBM 883725U, Руководство по установке

Страница: 33 / 114

Complete the following steps to install an adapter into slot 2:
1. Open the retaining clips on both sides of the slot 2 riser card.
Note: Insert your finger into the access hole on the slot 2 adapter cover to
open the retention latch at the rear of the server.
The following illustration shows the location of the access hole on the slot 2
adapter cover, the riser card and the riser-card retention latches.
Riser card
Riser card
retention latches
Slot 2 adapter cover
Access hole to
retention latch
2. Lift up and remove the slot 2 adapter cover and attached riser card from the
server.
3. Remove the expansion slot cover from the slot 2 adapter cover.
Attention: When you handle static-sensitive devices, take precautions to
avoid damage from static electricity. For information about handling these
devices, see “Handling static-sensitive devices” on page 8.
4. Prior to installing a full-length adapter, rotate the PCI-adapter retainer bracket
90° away from the adapter cover, to allow insertion of the adapter. See the
following illustration for reference.
5. Slide the connector portion of the adapter through the slot opening.
Chapter 2. Installing options
21