IBM 8677 - BladeCenter Rack-mountable - Power..., Планирование и руководство по установке

Страница: 108 / 126

Ethernet switch module configuration worksheet
Fill out the worksheet in this section for each Ethernet switch module you plan to
have in your BladeCenter unit. For information on filling out the worksheet, see
“Ethernet switch module configuration planning” on page 74 and the BladeCenter
Ethernet Switch Module Installation and User’s Guide .
Switch settings
Name
Location
Local contact
Get IP from (manual, BOOTP, DHCP)
IP address ____.____.____.____
Subnet mask ____.____.____.____
Default gateway ____.____.____.____
Switch GVRP (enabled or disabled)
MAC address aging timer (enabled or disabled)
Aging time (10 to 1,000,000 seconds)
Telnet time out
Telnet sessions (1 to 4)
Enable external ports for management
Port settings
Port
State Speed (Mbps) Duplex Flow control
E D 10 100 1000 Auto H F E D
1 x x
2 x x
3 x x
4 x x
5 x x
6 x x
7 x x
8 x x
9 x x
10 x x
11 x x
12 x x
13 x x
14 x x
Ex1
Ex2
Ex3
Ex4
98
BladeCenter Type 8677: Planning and Installation Guide