IBM 8480 - Eserver xSeries 205, Руководство по техническому обслуживанию и устранению неисправностей

Страница: 97 / 174

Note: See “System” on page 112 to determine which components should be replaced by a field service technician.
Beep/symptom FRU/action
2-2-2
(Keyboard controller failed.)
1. Keyboard.
2. System board
2-4-1
(Video failed; screen believed
operable.)
v
Extender card.
3-1-1
(Timer tick interrupt failed.)
v
System board.
3-1-2
(Interval timer channel 2 failed.)
v
System board.
3-1-3
(RAM test failed above address
OFFFFH.)
1. DIMM.
2. System board
3-1-4
(Time-Of-Day clock failed.)
1. Battery.
2. System board
3-2-1
(Serial port failed.)
v
System board.
3-2-2
(Parallel port failed.)
v
System board.
3-2-4
(Failure comparing CMOS memory
size against actual.)
1. DIMM.
2. System board.
3. Battery.
3-3-1
(Memory size mismatch occurred.)
1. DIMM.
2. System board.
3. Battery
3-3-2
(Critical SMBUS error occurred, I2C
error.)
1. Disconnect the server power cord from outlet, wait 30 seconds and
retry.
2. System board.
3. Microprocessor.
4. DIMMs.
5. DASD backplane.
6. DASD power cable.
3-3-3
(No operational memory in system.)
1. Install or reseat the memory modules, and then do a 3 boot reset.
(For more information on a 3 boot reset, see “Using the
Configuration/Setup Utility program” on page 9.)
2. DIMMs.
3. System board.
No-beep symptoms
Note: See “System” on page 112 to determine which components should be replaced by a field service technician.
No-beep symptom FRU/action
No beep occurs during POST.
v
System board.
No beep, no video, and the
system attention LED is off.
v System board.
Chapter 6. Symptom-to-FRU index
87