IBM 8480 - Eserver xSeries 205, Руководство по техническому обслуживанию и устранению неисправностей, Страница: 67 / 174

Installing memory modules
You can increase the amount of memory in your server by installing memory
modules. Your IBM xSeries 205 Type 8480 server uses industry-standard dual inline
memory modules (DIMMs).
Complete the following steps to install a DIMM:
Attention: When handling static-sensitive devices, take precautions to avoid
damage from static electricity. For details on handling these devices, see “Handling
static-sensitive devices” on page 37.
1. Review the safety precautions listed in the “Safety information” on page 119.
2. Turn off the server and all attached devices. Disconnect all external cables and
power cords; then remove the side cover. See “Removing the side cover” on
page 40 for details.
3. Remove the frame-support bracket. See “Removing the frame-support bracket”
on page 41.
4. Touch the static-protective package containing the DIMM to any unpainted
metal surface on the server. Then remove the new DIMM from the package.
5. Open the retaining clips and, if necessary, remove any existing DIMM.
6. Turn the DIMM so that the pins align correctly with the connector, and firmly
press the DIMM straight down into the connector by applying pressure on both
ends of the DIMM simultaneously. The retaining clips snap into the locked
position when the DIMM is firmly seated in the connector.
DIMM connector 1
DIMM connector 2
Chapter 4. Installing options
57