IBM 8480 - Eserver xSeries 205, Руководство по техническому обслуживанию и устранению неисправностей

Страница: 102 / 174

Note: See “System” on page 112 to determine which components should be replaced by a field service technician.
Error code/symptom FRU/action
166-201-003 System Management: Failed
(I2C bus error(s) See SERVPROC and
DIAGS entries in event log.)
1. Reseat cables between the system board and the power supply
or power cage assembly, if installed.
2. Power cage assembly, if installed.
3. System board.
166-201-004 System Management: Failed
(I2C bus error(s) See SERVPROC and
DIAGS entries in event log.)
1. DASD backplane
2. System board
166-201-005 System Management: Failed
(I2C bus error(s) See SERVPROC and
DIAGS entries in event log.)
1. Reseat Memory DIMMs.
2. Reseat microprocessors.
3. Memory DIMMs.
4. Microprocessors.
5. System board.
166-250-000 System Management: Failed
(I2C cable is disconnected. Reconnect I2C
cable between Remote Supervisor Adapter
and system board.)
1. If installed, reseat the I2C cable between the Remote
Supervisor Adapter (in PCI slot 1/J14) and system management
connector on the PCI riser card.
2. I2C cables.
3. Advanced System Management adapter.
4. System board.
166-260-000 System Management: Failed
(Restart ASM Error. After restarting, ASM
communication was lost. Unplug and cold
boot to reset ASM.)
1. Disconnect all server and option power cords from the server,
wait 30 seconds, reconnect, and retry.
2. Reseat the Remote Supervisor Adapter (in PCI slot 1/J14).
3. Remote Supervisor Adapter.
166-342-000 System Management: Failed
(ASM adapter BIST indicate failed tests.)
1. Ensure the latest firmware levels for Remote Supervisor
Adapter and BIOS.
2. Disconnect all server and option power cords from server, wait 30
seconds, reconnect, and retry.
3. Remote Supervisor Adapter.
166-400-000 System Management: Failed
(ISMP self test result failed tests: x where x
= Flash, RAM, or ROM.)
1. Reflash or update firmware for ISMP.
2. System board.
180-XXX-000 (Diagnostics LED failure.)
v Run diagnostics panel LED test for the failing LED.
180-XXX-001
(Failed front LED panel test.)
1. Operator information panel.
2. System board.
180-XXX-002
(Failed diagnostics LED panel test.)
1. Diagnostics panel.
2. System board.
180-361-003
(Failed fan LED test.)
1. Fan.
2. System board.
180-XXX-003
(Failed system board LED test.)
v
System board.
180-XXX-005
(Failed SCSI backplane LED test.)
1. SCSI backplane.
2. SCSI backplane cable.
3. System board.
92
IBM xSeries 205 Type 8480: Hardware Maintenance Manual and Troubleshooting Guide