IBM 6C1, Руководство по установке

Страница: 101 / 144

The following illustration shows the LEDs on the indicator panel, located inside the
server.
Memory
CPU
PCI
Fan
Fan
System Board
Power Board
1
2
3
4 3
2
1
Component LEDs
In addition to the indicator panel or display, individual LEDs are located on or near the
failing components. The LEDs are either on the component itself or on the carrier of the
component (memory card, fan, memory module, CPU).
The LEDs are amber, except for the power supplies. For the power supplies, two green
LEDs (AC Power Good and DC Power Good) indicate the fault condition for the power
supply.
Reporting the Problem
After you have determined which component is failing, report the problem.
1. Record the following information before calling for service:
v
Machine type and model
v
Server serial number
v
Any error codes that appear in the operator panel display or console
v
Any LEDs lit on the indicator panel
2. Call for service. You will be given the choice to replace the failing component
yourself or have a service representative replace it. If you are replacing the failing
component, go to “Repair Action” on page 86 for instructions.
Chapter 4. Attention LED and Lightpath LEDs
85