IBM 68Y7493, Руководство по установке

Страница: 39 / 58

GPU error LED
BPE4
Ck Nxt
CFFh
LP
The following table describes the LEDs on the expansion blade system board and
suggested actions to correct the detected problems. Follow the suggested actions in
the order in which they are listed in the Action column until the problem is solved.
Lit light path
diagnostics LED
Description Action
LP The light path LEDs have power.
If LP LED is green, check for error LEDs that
are lit in the expansion blade.
If LP is off, install the expansion blade into the
base blade and install the entire assembly into
the BladeCenter for 5-10 minutes to recharge
the LEDs.
None An error has occurred and cannot be isolated.
An error has occurred with the GPU adapter.
1. Make sure that the light path diagnostics
(LP) LED is lit to ensure that there is
enough power in the blade server to light
the rest of the LEDs.
2.
Check the blade device and BladeCenter
advanced management module event logs
for information about an error that is not
represented by a light path diagnostics
LED.
GPU An error has occurred with the PCIe
connector.
1. Make sure that the GPU adapter installed
in the PCIe connector is supported.
2. Check the auxiliary power cable.
3. Replace the adapter installed in the PCIe
connector.
4.
Replace the expansion blade.
Chapter 3. Installing options
23