IBM 68Y7493, Руководство по установке

Страница: 29 / 58

Removing a GPU Expansion Blade
Use this information to remove a GPU Expansion Blade.
The following illustration shows how to remove the expansion blade.
Expansion unit
Blade server
cover release
Blade server
cover release
Note: If more than one expansion blade is installed, remove each expansion blade,
one at a time.
To remove an expansion blade, complete the following steps:
1. Read the Safety information beginning on page “Safety” on page v and
“Installation guidelines” on page 7.
2. If the blade server and expansion blades are installed in a BladeCenter unit,
shut down the operating system and turn off the blade server; then, remove the
combined blade server and expansion blades from the BladeCenter unit (see the
documentation that comes with the blade server for more information).
3.
Carefully lay the combined unit down on a flat, static-protective surface, with
the cover side up.
4. Press the cover release on each side of the blade server or the expansion blade
below the expansion blade that you are removing and lift the expansion blade
from the blade server.
5. Rotate the expansion blade open; then, lift the expansion blade from the blade
server.
6. If additional expansion blades need to be removed, repeat steps 4 and 5.
Chapter 3. Installing options
13