IBM 5100, Руководство пользователя

Страница: 179 / 214

Chapter 7. Solving Problems
165
Troubleshooting charts
pnt0-15 No more devices to open.
Explanation: The SunSoft Solaris driver cannot find any more Ethernet controllers.
Action: Verify that additional IBM Netfinity 10/100 Fault Tolerant Adapters are
present or replace the Ethernet adapter that fails to respond. If the problem persists,
run the diagnostic programs.
pnt0-17 Device fault...Reset initiated!
Explanation: The SunSoft Solaris driver has been reset due to a device fault.
Action: Verify that additional IBM Netfinity 10/100 Fault Tolerant Adapters are
present or replace the Ethernet adapter that fails to respond. If the problem persists,
run the diagnostic programs.
pnt0-19 IRQ found for PCnet hardware does not match space.c (or pnt.conf)!
Explanation: This is a warning message referring to the interrupt request (IRQ) that
the SunSoft Solaris driver found in the system.
Action:
Ignore this message if you are sure that this is what you want to do.
Otherwise, run the NETCONFIG program to match the hardware settings
pnt0-20 add_intr_handler failed! Unknown interrupt type.
Explanation: The interrupt request (IRQ) that was specified, or the IRQ that was
found, conflicts with other devices in the server.
Action:
• Modify your hardware settings.
• Run the NETCONFIG program to search for another Ethernet controller.
pnt0-21 add_intr_handler failed! Out of range interrupt number.
Explanation: The interrupt request (IRQ) that was specified, or the IRQ that was
found, conflicts with other devices in the server.
Action:
• Modify your hardware settings.
• Run the NETCONFIG program to search for another Ethernet controller.
pnt0-22 add_intr_handler failed! Out of range IPL.
Explanation: The interrupt request (IRQ) that was specified, or the IRQ that was
found, conflicts with other devices in the server.
Action:
Modify your hardware settings. Run the NETCONFIG program to search for
another Ethernet controller.
pnt0-23 add_intr_handler failed! Vector already occupied.
Explanation: The interrupt request (IRQ) that was specified, or the IRQ that was
found, conflicts with other devices in the server.
Action:
Modify your hardware settings.
pnt0-24 add_intr_handler failed! Vector already shared at different IPL.
Explanation: The interrupt request (IRQ) that was specified, or the IRQ that was
found, conflicts with other devices in the server.
Action:
• Modify your hardware settings.
• Run the NETCONFIG program to search for another Ethernet controller.
Table 23. UNIX LLI driver messages for the Ethernet controller