IBM 4mm DDS-2 Tape Autoloader, Инструкция по установке и эксплуатации

Страница: 29 / 52

Chapter 5. Using the 4mm DDS-2 Tape Autoloader
The operator will need to load cartridges into a magazine, load the magazine into the
Autoloader, use the operator panel, and clean the tape heads.
Applying Power to the 4mm DDS-2 Tape Autoloader
When power is applied to the tape autoloader the following takes place:
Ÿ
All three LED's light
Ÿ
The LCD displays the currently configured SCSI ID
Ÿ
The LED's start flashing and the LCD displays SELFTEST
Ÿ
If a magazine is loaded, the LCD displays MAG CHECK as it verifies which slots
contain media.
– As the individual cartridges are identified, their corresponding location
numbers are displayed on the LCD.
Ÿ
When all testing has been completed, the tape autoloader displays MAG
LOADED on the LCD and lights the MAGAZINE PRESENT LED.
Ÿ
If no magazine is loaded, continue with the next section.
Chapter 5. Using the 4mm DDS-2 Tape Autoloader
5-1