IBM 4mm DDS-2 Tape Autoloader, Инструкция по установке и эксплуатации

Страница: 37 / 52

Tape Activity (LED)
This light indicates what is happening to the cartridge in the drive:
Ÿ
Steady Green: A cartridge is present in the drive
Ÿ
Rapidly Flashing (twice per second) Green: Data is being read or written
Ÿ
Slowly Flashing (once per second) Green: A cartridge is being loaded or
unloaded.
Operator Attention Required (LED)
This light indicates that the operator needs to take some action:
Ÿ
Steady Amber: A serious hardware error has occurred. If a power reset does not
eliminate the problem, the tape autoloader will require service.
Ÿ
Flashing Amber: A user-recoverable error has occurred:
– The front-panel door is open.
– A cartridge is in the drive, but no magazine is present.
– The tape heads need cleaning.
– The tape is nearing the end of its useful life.
– A firmware upgrade is occurring.
When the Operator Attention Required LED is on or flashing, an error message
might be displayed in the Status LCD. These error messages are explained under
“Error Messages” on page 5-13.
Chapter 5. Using the 4mm DDS-2 Tape Autoloader
5-9