IBM 4mm DDS-2 Tape Autoloader, Инструкция по установке и эксплуатации

Страница: 36 / 52

Controls and Indicators
Select Button
The Select button allows you to select a cartridge from the magazine in the unit.
The number of the cartridge selected is displayed on the left side of the LCD. If you
press the Select button repeatedly, the display cycles through the cartridges
available in the magazine.
Eject Button
The Eject button starts the unload process. The drive unloads any currently loaded
cartridge, and the changer mechanism returns it to the magazine. The magazine is
then ejected.
Note: Refer to “Forcing an Ejection” on page 5-5.
Load Tape Button
The Load Tape button is used to load the selected cartridge from the magazine into
the drive. The drive then goes into sequential mode, automatically loading the next
highest numbered cartridge.
Note: When in Random Mode, the select and load buttons are disabled. Their
function is controlled by host software.
Magazine Present (LED)
Ÿ
Steady Green: A magazine is in the Autoloader.
Ÿ
Flashing Green: A magazine is being loaded, checked, or ejected.
5-8
4mm DDS-2 Tape Autoloader Installation and User's Guide