IBM 4002-C2A, Инструкция по установке и эксплуатации

Страница: 37 / 98

Chapter 3. Installation
CAUTION:
Servicing of this product or unit is to be performed by trained service personnel
only. (C032)
This chapter describes how to physically install the c-series switches.
Information about configuring IP addresses and connecting network devices is in
the section “Configuring IP addresses” on page 26.
Attention: Before starting any installation or maintenance procedure, refer to
“Safety notices” on page xi.
Unpacking a system
The systems ship with the following items. Please review the list below and verify
the contents. If any items are missing, please contact the place of purchase.
Package contents
v IBM c-series Ethernet switch with one 500 W AC power supply
v
Printed user documentation
v CD-ROM and the user documentation (including this guide)
v
Adjustable rack mounting ears
v 6’ straight-through EIA/TIA DB-9 serial console cable
v
Six rubber feet
General requirements
To manage the system, you need the following items for serial connection to the
router:
v
A management station, such as a PC running a terminal emulation application.
v A straight-through EIA/TIA DB-9 serial cable (F/F).
You use the serial connection to perform basic configuration tasks including
assigning an IP address and network mask to the system. This information is
required for managing the system using the Web management interface or using
the CLI through Telnet.
Summary of installation tasks
Follow the steps listed below to install your Ethernet switch. Details for each of the
steps highlighted below are provided in this chapter and in the following chapter.
Table 4. Summary of installation tasks
Task
number
Task Where to find more information
1 Ensure that the physical environment
that will host the device has the proper
cabling and ventilation. “Preparing the installation site” on
page 13
© Copyright IBM Corp. 2009
11