IBM 300GL Type 6275, Руководство пользователя

Страница: 97 / 208

Ÿ
Serial Port Ring Detect: If your computer has an external modem connected to
a serial port and you want the computer to turn on automatically when a ring is
detected on the modem, set this feature to Enabled.
Ÿ
MODEM Ring Detect: If your computer has an internal modem and you want
the computer to turn on automatically when a ring is detected on the modem,
set this feature to Enabled. The modem must support this feature and must be
attached to the Modem Ring Detect connector on the riser card in your
computer. See Installing Options in Your Personal Computer for more information.
Ÿ
Wake Up on Alarm: With this feature, you can specify a date and time at
which the computer will be turned on automatically. This can be either a single
event, a daily event, or a weekly event.
Ÿ
PCI Wake Up:
If enabled, this setting allows your system to power on in
response to wake up requests from PCI devices that support this feature.
To set Automatic Power-On features:
1. Start the Configuration/Setup Utility program (see “Starting and using the
program” on page 62).
2. Select Power Management from the Configuration/Setup Utility program menu.
3. Select Automatic Power On.
4. Select the menu item for the feature you want to set. Use Left Arrow (
←
) or
Right Arrow (
→
) to select either Enabled or Disabled.
5. Select Startup Sequence for the feature. Use Left Arrow (
←
) or Right Arrow
(
→
) to select either Primary or Automatic.
6. Press Esc until you return to the Configuration/Setup Utility program menu.
7. Before you exit from the program, select Save Settings from the
Configuration/Setup Utility program menu.
8. To exit from the Configuration/Setup Utility program, press Esc and follow the
instructions on the screen.
Chapter 5. Using the Configuration/Setup Utility program
79