IBM 300GL Type 6275, Руководство пользователя

Страница: 60 / 208

Loading a CD into a vertically positioned desktop model
The instructions in this section are for desktop models that are placed in a vertical
position. If you have a desktop model and do not vertically position the computer,
use the instructions in “Loading a CD” on page 41 when using the CD-ROM drive.
Note: If you place the desktop model in a vertical position, use a floor stand to
prevent damage to the computer due to overheating. A floor stand is an
available option from IBM. Look for more information on the World Wide
Web at:
http://www.ibm.com/pc/us/options/
A CD-ROM drive in a vertically positioned desktop model is placed on its side. In
order to load a CD into the drive securely, you must use the specific support
mechanisms, such as extendable tabs or a support wire, provided with the drive.
There are several CD-ROM drives available for your computer. They are alike
except for the support mechanisms used to hold the CD in place when it is inserted
into the CD-ROM drive. Use the information on the following pages to identify the
CD-ROM drive in your computer and then use the accompanying instructions for
loading and unloading a CD.
Note:
If the tray does not slide out of the drive when you press the Eject/Load
button, insert the pointed end of a large paper clip into the emergency-eject
hole located above and to the left of the CD-ROM indicator light.
42
Using Your Personal Computer