variety of network configurations, ranging from conventional
10BASE-T to Fast Ethernet environments.
The adapters:
¹
Operate in shared 10BASE-T or 100BASE-TX environments as
well as in switched 10 Mbps and 100 Mbps Ethernet networks
¹
Run at either 10 Mbps or 100 Mbps in full-duplex mode, yielding
20-Mbps and 200-Mbps capacity, respectively
¹
Attach to 10-Mbps and 100-Mbps LANs with a single RJ-45
connector
¹
Operate in symmetrical multiprocessing (SMP) environments
¹
Display the status of link, activity, and 100-Mbps operation via
LEDs
|
¹
Support Novell NetWare 3.12 or higher, IBM OS/2 LAN Server,
|
Microsoft LAN Manager, Windows for Workgroups 3.11,
|
Windows NT 3.51 or higher, Windows 95, Windows 98, SCO
|
Open Desktop 3.0, SCO Open Server 5.0, and SCO UnixWare
|
2.1 or higher.
|
¹
The 10/100 EtherJet PCI Adapter with Wake on LAN supports
|
system wakeup events in both ACPI and APM environments with
|
IBM Wake on LAN-capable PC systems.
¹
The Boot ROM module is a standard feature for the 10/100
EtherJet PCI Adapter with Wake on LAN. The card comes with
an onboard ROM pre-flashed with Intel LANDesk Service Agent
code (LSA code) for Dynamic Host Configuration Protocol
(DHCP) remote boot ready. For the Remote Program Load
(RPL) remote boot, a flash utility disk is available for re-flashing
the ROM to RPL code.
¹
For 10/100 EtherJet PCI Adapter, an optional ROM Module kit
(PN 86H2856) is available for your DHCP or RPL remote boot
applications.
1-2
10/100 EtherJet PCI Adapters
Title: ASB3CNTL CreationDate: 07/16/98 18:07:52
