Figure
2-6. PC Wake on LAN Signal Connector (2-Pin)
2
Install the adapter as described in steps 6, 7, and 8 on
page 2-2.
3
With your PC cover off, locate the 2-pin Wake on LAN signal
connector on the PC planar as shown in Figure 2-6. On the
male-female end of the 3-way cable, connect the female
connector to the PC 2-pin Wake on LAN signal connector.
Make sure that the cable is below the riser bracket so that it
does not become dislodged or damaged when you close or
open the PC cover.
2-8
10/100 EtherJet PCI Adapters
Title: ASB3CNTL CreationDate: 07/16/98 18:07:52