background image

 

 

 

your telephone number is called. In most but not all areas, the sum of the RENs of all devices connected to one line
should not exceed five (5.0). To be certain of the number of devices you may connect to your line, as determined
by the REN, you should contact your local telephone company to determine the maximum REN for your calling
area. If your telephone equipment causes harm to the telephone network, the telephone company may discontinue
your service temporarily. If possible, they will notify you in advance. But if advance notice is not practical, you
will be notified as soon as possible. You will be informed of your right to file a complaint with the FCC.

Your telephone company may make changes in its facilities, equipment, operations or procedures that could affect
the proper functioning of your equipment. If they do, you will be notified in advance to give you an opportunity to
maintain uninterrupted telephone service.

If you experience trouble with this telephone equipment, please contact Xircom, Inc. at (805) 376-9200 for
information on obtaining service or repairs. The telephone company may ask that you disconnect this equipment
from the network until the problem has been corrected or until you are sure that the equipment is not
malfunctioning. There are no user serviceable parts contained in this equipment.

This equipment may not be used on coin service provided by the telephone company. Connection to party lines is
subject to state tariffs. The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a
computer or other electronic devices, including fax machines, to send any message unless such message clearly
contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date
and time it is sent and an identification of the business or other entity, or other individual sending the message and
the telephone number of the sending machine or such business, other entity, or individual. (The telephone number
provided may not be a 900 number or any other for which charges exceeds local or long-distance transmission
charges.) In order to program this information into your fax software, you should refer to the manual of the Fax
software being used.

Canadian Department of Communications

Industry Canada (IC) Notice

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in
the Radio Interference Regulations of the Canadian Department of Communications. Le présent appareil numérique
n'émet pas de bruits radioelectriques depassant les limites applicables aux appareils numériques de Classe B
prescrites dans le rèlement sur le brouillage radioelectrique edicte par le Ministère des Communications du Canada.

NOTICE:  The Industry Canada (IC) label identifies certified equipment. This certification means that the

equipment meets telecommunications network protective, operational and safety requirements as prescribed
in the appropriate Terminal Equipment Technical Requirements document(s). The department does not
guarantee the equipment will operate to the user's satisfaction.

Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the
local telecommunications company. The equipment must also be installed using an acceptable method of
connection. The customer should be aware that compliance with the above conditions may not prevent degradation
of service in some situations.

Repairs to certified equipment should be coordinated by a representative designated by the supplier. Any repairs or
alterations made by a user to this equipment, or equipment malfunctions, may give the telephone communications
company cause to request the user to disconnect the equipment. Users should ensure for their own protection, that
the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if
present, are connected together. This precaution may be particularly important in rural areas.

42 

 

Содержание 10/100 EtherJet
























































Отзывы: