IBM 10/100 EtherJet, Руководство пользователя

Страница: 29 / 55

Advanced information
Command Description
Sn Control S register:
Sn?: Read the S register n?, where n=0-110.
Sn=r: Set the S register n to value r (n=0-110, r=0-255).
T Select tone dialing.
V DCE response format:
Control the result code format.
V0: Displays result code as digits.
V1: Displays result code as text (default).
W Result code option:
W0: CONNECT result code reports DTE receive speed. Disable protocol result codes.
W1: CONNECT result code reports DTE receive speed. Enable protocol result codes.
W2: CONNECT result code reports DCE receive speed. Enable protocol result codes (defaults).
X Result code selection and call progress monitoring:
Control the tone detection option used in the dialing process.
Ext. Result Code Dial Tone Detect Busy Tone Detect
X0 Disable Disable Disable
X1 Enable Disable Disable
X2 Enable Enable Disable
X3 Enable Disable Enable
X4 Enable Enable Enable (default)
X5 Enable Enable Enable
X6 Enable Enable Enable
X7 Disable Enable Enable
Y Long-space disconnect:
Long space disconnect is always disabled.
Y0: Disable long space disconnect (default).
Y1: Enable long space disconnect (NOT SUPPORTED).
Z Reset and recall stored profile.
&B V.32 auto retrain:
This modem always auto retrains.
&B0: Disable V.32 auto retrain (NOT SUPPORTED).
&B1: Enable V.32 auto retrain (default).
&C Data carrier detect (DCD) control:
&C0: Specifies that carrier detect (CD) is always on.
&C1: Turns on CD when the remote carrier is present (default).
&D Data terminal ready (DTR):
&D0: Ignores the DTR signal.
&D1: Return the modem to command mode after a DTR toggle.
&D2: Hangs up the modem and returns to command mode after a DTR toggle (default).
&D3: Resets the modem after a DTR toggle.
&F Local factory settings:
Loads the factory default configuration.
&G V.22bis guard tone control:
Determines which guard tone to transmit while transmitting in the high band.
&G0: Disable the guard tone (default).
&G1: Enables a 550-Hz guard tone.
&G2: Enables a 1800-Hz guard tone.
Using the modem
19