IBM 10/100 EtherJet, Руководство пользователя

Страница: 15 / 55

For Windows NT
Hints
If you can't connect to a server, or if Windows 98 reports an error after you
double-click Network Neighborhood, do as follows:
Make sure that you're using the drivers from the drivers CD-ROM shipped with
the Combo card.
Make sure that the driver is loaded and the protocols are bound. Check the
Device Properties list for trouble indicators (if there is trouble, an X or ! symbol
appears beside the icon).
Ask your LAN administrator whether you need to install additional networking
software.
If the problem persists, go to “Troubleshooting” on page 7.
For Windows 2000
To install the driver, do as follows:
1
Start Windows 2000.
The “Found New Hardware Wizard” appears.
2
Click Next.
3
Select Search for a suitable driver for my device (recommended), and click
Next.
4
Select Specify a location, and click Next.
5
When prompted, insert the drivers CD-ROM.
6
Specify
x:\ETHERNET
, where
x
is the drive letter of the CD-ROM drive, and click
OK.
7
Follow the instructions on the screen.
8
When you are prompted, restart your system.
For Windows NT
To install the driver, do as follows:
1
Start Windows NT.
2
Open Control Panel, and then Network.
3
If this is the first time to configure the Network, the message appears and saying
“Windows NT Networking is not installed. Do you want to install it now?.”
Click Yes. If not, go to step 12 on page 6.
4
Select “Wired to the network” and click Next.
5
Click Select from list... and Have Disk....
6
Insert the drivers CD-ROM.
7
Specify
x:\ETHERNET
, where
x
is the drive letter of the CD-ROM drive.
Using the LAN
5