IBM 10/100 EtherJet, Руководство пользователя

Страница: 33 / 55

Advanced information
Register Function Register/Units
S3 Command Line Termination Character (user-defined) 0-127 ASCII
S4 Response Formatting Character (user-defined) 0-127 ASCII
S5 Command Line Editing Character (user-defined) 0-127 ASCII
S6 Wait Before Dialing 2-65 seconds
S7 Connection Completion Time-Out 1-255 seconds
S8 Comma Dial Modifier Time 0-65 seconds
S10 Automatic Disconnect Delay 1-254/10ths of a second
S11 DTMF Dialing Speed 50-150 ms
S12 Escape Guard Time 0-255/50ths of a second
S14 General Bit Mapped Options Status Only bit 2 and bit 6 are used.
Bit 3: Result codes (Vn)
0=Numeric(V0)
1=Verbose(V1)
Bit 6: Pulse dial PPS selection
(&Pn)
0=10 PPS (&p0, &p1)
1=20 PPS (&p2)
S21 V.24/General Bit Mapped Options Status Only bits 3, 4, and 5 are used.
Bits 3-4: DTR behavior (&Dn)
0=&D0 selected
1=&D1 selected
2=&D2 selected
3=&D3 selected
Bit 5: DCD behavior (&Cn)
0=&C0 selected
1=&C1 selected
S22 Results Bit Mapped Options Status Only bits 4, 5, and 6 are used.
Bits 4-5: result codes (Xn)
0=X0 selected
4=X4 selected
5=X5 selected
6=X6 selected
7=X7 selected
S24 Timer to Control Sleep Mode 0, 5-65 seconds
S28 V.34 Modulation Enable/Disable 0=Disabled
1=Enabled
S30 Inactivity Timer 0-255 minutes
S32 Synthetic Ring Volume 0-255
S33 Synthetic Ring Frequency 0-5
Using the modem
23