IBM 10/100 EtherJet, Руководство пользователя

Страница: 14 / 55

For Windows 98
9
Follow the instructions on the screen.
10
When you are prompted, restart your system.
Hints
If you can't connect to a server, or if Windows 95 reports an error after you
double-click Network Neighborhood, do as follows:
Make sure that you're using the drivers from the driver CD shipped with the
Combo card.
Make sure that the driver is loaded and the protocols are bound. Check the
Device Properties list for trouble indicators (if there is trouble, an X or ! symbol
appears beside the icon).
Ask your LAN administrator whether you need to install additional networking
software.
If the problem persists, go to “Troubleshooting” on page 7.
For Windows 98
To install the driver, do as follows:
1
Start Windows 98.
The “Add New Hardware Wizard” dialog box for the PCI Ethernet Controller
appears.
2
Click Next.
3
Insert the drivers CD-ROM.
4
Select Search for the best driver for your driver.
5
Click Next.
6
Select Specify a location: and specify
x:\ETHERNET
,
where
x
is the drive letter of the CD-ROM drive.
7
Click Next.
8
Follow the instructions on the screen.
9
When you are prompted to specify the path that the device driver is in, type
x:\ETHERNET
, where
x
is the drive letter of the CD-ROM drive.
10
When you are prompted, restart your system.
4