IBM 10/100 EtherJet CardBus Adapter with 56K Modem, Инструкция по установке и эксплуатации

Страница: 39 / 67

Diagnostics and Troubleshooting 4-3
Troubleshooting Checklist
• Review the README.TXT file on the DOS, Windows 3.x, and
NetWare Installation Diskette or Windows 95, 98, and NT
Network Drivers Diskette.
• Be sure you have the current drivers for your adapter. Check
the IBM website at http://www.networking.ibm.com/support/
ejetcrdbus56.
• When loading drivers or running the test utility, keep the LAN
adapter cable attached to the EtherJet CardBus Adapter with
56K Modem.
• Under Novell, ensure that the FRAME TYPE you are using is
the same as that of the file server. The server frame type
should be specified as the first frame type in the NET.CFG.
• In a twisted pair environment, try plugging directly into the
hub or concentrator.
• Plug in to a known working network connection.
• Try using the EtherJet CardBus Adapter with 56K Modem on
a different computer.
• Try another EtherJet CardBus Adapter with 56K Modem if
available.
• If your computer has multiple PC Card sockets, move the
adapter to another socket.
• If you have more than one PC Card device in your computer,
remove the non-IBM PC Card devices.
• Test the EtherJet CardBus Adapter with 56K Modem without
loading Card and Socket Services to prevent conflicts
between the EtherJet CardBus Adapter with 56K Modem and
Card and Socket Services. The interrupt, memory address
location, and I/O address for Card and Socket service drivers
must match the IBM configurations in NET.CFG or PROTO-
COL.INI (if used).
• Make sure that the IBM interrupt, memory address, and I/O
address do not conflict with other installed hardware (such as
sounds cards, CD-ROM drives and PEN devices).
fcr0mst.book Page 3 Monday, July 13, 1998 9:36 AM