IBM 10/100 EtherJet CardBus Adapter with 56K Modem, Инструкция по установке и эксплуатации

Страница: 29 / 67

Windows 95 and Windows 98 Installation 2-3
For network administrators only: The network node address
can be modified by specifying a value for the Network Address
such as 0080C7112233. If the user does NOT specify a Network
Address, then the IBMC.SYS driver uses the network node
address contained in the EtherJet CardBus Adapter with 56K
Modem Card Information Structure.
Note: For definitions of the keywords above, see the Keyword
Reference (All Drivers) in Chapter 4, “Diagnostics and
Troubleshooting”.
Troubleshooting Modem Installation
Review this section if any of the following problems occur:
• Modem initialization errors occur when attempting to dial-out
using a communications application.
• Connection failures or other problems occur.
DirectEnable OFF
ON
AutoDetect 1
2
0
EarlyTransmit OFF
ON 0
1
InterruptStyle AutoDetect
PCI-IRQ
ISA-IRQ 0
1
2
LineSpeed AutoDetect
10 Mbps
100 Mbps 0
1
2
LineMode AutoDetect
Half-Duplex
Full-Duplex 0
1
2
Network
Address See Network Administrators, note
below.
Socket Autodetect
1, 2, 3, 4 0
1, 2, 3, 4
Parameter Valid Values Reg. Value
fcr0mst.book Page 3 Monday, July 13, 1998 9:36 AM