IBM 10/100 EtherJet CardBus Adapter with 56K Modem, Инструкция по установке и эксплуатации

Страница: 34 / 67

3-2 10/100 EtherJet CardBus Adapter with 56K Modem
7. Click OK. The Select OEM Option window opens.
8. Click OK. The Windows NT Setup window briefly displays.
9. IBM 10/100 EtherJet CardBus Adapter with 56K Modem
Settings window opens, displaying the default settings.
Note: In most circumstances, the default settings properly
operate the CardBus Adapter. However, consult the
README.TXT file on the Windows 95, 98, and NT
Network Drivers Diskette for the latest
recommendations.
10. Click OK. The Network Settings window redisplays.
11. Click Close. If any dialog boxes appear related to setting up
network protocols, click Cancel, and contact your Network
Administrator.
12. When the Network Settings Change window opens, click Yes
to restart the computer.
Modem Setup
1. After the computer has been restarted, select Modems from
the Control Panel.
2. At the Install New Modem screen make sure that the Don't
detect my modem; I will select it from a list checkbox is NOT
checked. Click Next. NT will query the COM ports looking for
the IBM modem. Once the modem is found, click Next>.
3. If a Standard Modem is found, click Change. On the next
screen, click Have Disk. With a:\ selected, click OK.
4. The CountrySelect utility will be automatically launched.
Make the appropriate country selection (U.S.A. is the
default).
5. At the Install New Modem screen click Finish.
6. At the Modems Properties screen click Dialing Properties...
to set up dialing properties (not necessary if a modem had
been previously installed). Click Close.
fcr0mst.book Page 2 Monday, July 13, 1998 9:36 AM