IBM 0367, Руководство пользователя

Страница: 9 / 36

__ f. Click on Add .
__ g.
Select Protocol .
__ h. Click on Add .
__ i. Select Microsoft listed under
″
Manufacturers
″
.
__ j. Select TCP/IP listed under
″
Network Protocols
″
.
__ k. Click on OK twice.
__ l. Select Yes to restart the PC.
__ m. Window 95 requires Dial Up Networking (DUN). To verify the
level of DUN on your system, do the following
__ 1)
Click on
Start
__ 2) Click on Settings
__ 3)
Click on Control Panel
__ 4) Click on System
Write the number that is located below Microsoft Windows 95
on a piece of paper. For example, 4.00.950 would be the base
code as shipped on the original Windows 95 compact disc
(CD). Your version may also have a letter after that number.
__ 5) Click on Cancel
__ 6) Click on Add/Remove Programs
Is Microsoft Dial-Up Networking (DUN) Upgrade listed?
Yes No
↓
You will be instructed how to install Dial-Up
Networking later in this document.
__ 7) Click on Cancel .
Note: If you are using either COM3 or COM4, be sure that the addresses and
the IRQ settings do not conflict with other hardware resources.
Installing the Cable
__ 1. Ensure that all jobs are complete.
__ 2.
When all jobs are complete, type
pwrdwnsys *immed
on an AS/400 command line and press the Enter key.
Note: Should you encounter difficulties during the installation, contact
your authorized dealer or service provider.
__ 3. When the AS/400 is powered down, power off all PCs and devices, such as
printers and displays, that are connected to the system unit.
__ 4. Unplug any power cords, such as printers and displays, from electrical
outlets.
__ 5. Unplug the system unit power cord from the electrical outlet.
__ 6. Remove the system unit back cover, if not already removed.
__ 7.
Do you have cable
part number 97H7557
to connect?
Yes No
↓
You only have cable part number 97H7591 to connect. Go to step
13 on page 5.
Installation Instruction
3