IBM 0367, Руководство пользователя

Страница: 18 / 36

__ g. Press the Power push button that is located on the AS/400 control
panel.
Note: The system takes approximately 5 to 10 minutes to power on
and complete an IPL. You should see data changing in the
Function/Data display.
__ h. Is reference code x6004501 (where the x is, there is a letter or
number) shown in the Function/Data display?
No Yes
↓
Go to step 4.
__ i.
Is the Attention light lit?
Yes No
↓
If the system shows no activity for more than 10 minutes, go
to the “Handling and Reporting System Problems” section of
the
Basic System Operation, Administration, and Problem
Handling , SC41-5206-04, which was shipped with your
system. Then return here and continue.
__ j. Is a System Reference Code (SRC) x6xx500x (where the x is any letter
or number), shown in the Function/Data display?
Yes No
↓
Go to the “Handling and Reporting System Problems”
section of the
Basic System Operation, Administration, and
Problem Handling , SC41-5206-04, which was shipped with
your system. Then return here and continue.
PC Setup
__ 4. Open the Operations Console icon by doing the following:
__ a. Start
__ b. Programs
__ c. IBM AS/400 Client Access
__ d. AS/400 Operations Console
__ 5. Select Local Controlling System (LCS) to AS/400 System .
__ 6.
Click on
Next
.
__ 7. Type the system name of the AS/400 you want to connect to.
Note: The system name is only a reference name and does not need to be
the actual system name. For example, you could name the system
ATLANTA
, when the actual name is 10-12345 .
Then, click on Next .
__ 8. To accept the default value, Direct Cable Connection , click on Next .
__ 9. Indicate which Operations Console actions you want to use with your
AS/400 system. If you installed
part number 97H7557 (Operations Console
cable) and part number 97H7591 (Remote Control Panel cable) , you need
to select both (Remote Control Panel and Console) .
__ 10. Click on Next . If you are only using the Remote Control Panel, go to step
12 on page 13. Otherwise, go to the following Note .
Note: If you chose Console only on the Actions display, you would not get
any of the Remote Control Panel displays here.
12
AS/400e 170 or 250 0367 Operations Console and 0381 Remote Control Panel Cable V4R5