IBM 0367, Руководство пользователя

Страница: 23 / 36

v
Confirm that the electrical outlet is functioning by
plugging in a lamp or other simple device.
v
Ensure that the power cord is securely plugged into the
system unit and electrical outlet.
__ c. Press the Up or Down select push button until 02 appears in the
Function/Data display.
__ d. Press the Enter push button on the control panel.
__ e. Press the Up or Down select push button until B M appears in the
Function/Data display.
__ f. Press the Enter push button on the control panel.
__ g.
Press the Power push button that is located on the AS/400 control
panel.
Note: The system takes approximately 5 to 10 minutes to power on
and complete an IPL. You should see data changing in the
Function/Data display.
__ h. Is reference code x6004501 (where the x is, there is a letter or
number) shown in the Function/Data display?
No Yes
↓
Go to step 4.
__ i. Is the Attention light lit?
Yes No
↓
If the system shows no activity for more than 10 minutes, go
to the “Handling and Reporting System Problems” section of
the
Basic System Operation, Administration, and Problem
Handling , SC41-5206-04, which was shipped with your
system. Then return here and continue.
__ j. Is a System Reference Code (SRC) x6xx500x (where the x is any letter
or number), shown in the Function/Data display?
Yes No
↓
Go to the “Handling and Reporting System Problems”
section of the
Basic System Operation, Administration, and
Problem Handling , SC41-5206-04, which was shipped with
your system. Then return here and continue.
PC Setup
__ 4. Open the Operations Console icon.
Installation Instruction
17