IBM 0367, Руководство пользователя

Страница: 21 / 36

__ e. Select the communications port that you installed the console cable
into. (For example,
Com1 .)
__ f.
Click on Next .
Note: The first time a modem is configured on a PC, a display will
appear asking you for your telephone area code or country
code and any numbers necessary to access an outside line. If
you get this display, add the information, then click on
Next to
exit that online display and continue with the next step.
__ g. Click on Finish .
__ h. Click on Properties . Set Maximum speed to 115200. Click on OK .
__ 6.
Click on
OK
or
Close
.
__ 7. Click on Network .
Note: It is assumed that Remote Access to the Network has been previously
installed. If you get the message “Windows NT Networking is not
installed”, click on
Yes to install this support. The minimum
requirement for Operations Console is Remote Access to the Network .
At minimum, install Remote Access to the Network support, then click
on Next when asked to choose the network adapter without selecting
the adapter.
When the Add RAS Device window appears, continue with step 13.
__ 8. Click on Services .
__ 9.
Is Remote Access Service installed?
Yes No
↓
To install Remote Access Service , do the following:
__ a. Put the Windows NT compact disc (CD) in the CD-ROM
drive.
__ b. Close the “Windows NT CD-ROM” window when it appears.
__ c. Click on Add .
__ d. Select Remote Access Service and click on OK .
__ e.
Set the path to the Windows NT files that are used as the
source for this install. For example, D:\I386 where D is the
drive letter of the CD-ROM or LAN drive.
When Add RAS Device window appears, then go to step 13.
Select Remote Access Service .
__ 10. Click on Properties .
__ 11. Is AS/400 Operations Console Connection listed?
No Yes
↓
Go to step 14.
Remove any devices listed for Com1. If you are installing the Remote
Control Panel, remove any device on Com2.
__ 12. Click on Add .
__ 13.
Select AS/400 Operations Console Connection . Then click on OK .
__ 14. You should be at the Remote Access Setup window.
Installation Instruction
15