Ibex Dental Technologies SUMMIT, Руководство по эксплуатации

Страница: 34 / 41

34
There are 2 methods for copying a program:
Select program Sample 1 from the Select Program screen and touch the Modify button. A screen
similar to Display Example #33 will be displayed. In the Modify Program screen, touch the Copy
button. The next screen displayed will be the Name Program screen. Enter the new name of the
program to be copied in the same manner as you used to enter in Sample 1 earlier in the manual. Name
this program Sample 2. When completed, touch the OK button. The next screen will look very similar
to the Select Program screen. Select the program location number where you would like the program to
be copied to. If necessary, use the Page Up or Page Down arrows to bring up the desired program page.
Touch the appropriate program location box and the copied program will be completed. The Select
Program screen will appear with this copied program selected. The copied program can now be run or
modified as necessary.
Display Example #33
Select program Sample 1 from the Select Program screen and touch the Modify button. Once in the
Modify Program screen,
do not
touch the Copy button as in Method 1. Make all necessary changes
that will be required to the copied program first. For example, program Sample 1, created earlier in the
manual, has a Pre Heat of 5 minutes and a High Temp of 890

C. The copied program will require a
Pre Heat of only 1 minute and a High Temp of 840

C. Again, make all the changes first.
Do not
modify the program name to Sample 2 at this time.
After making all the required changes to the program, touch the copy button. The next screen displayed
will be the Name Program screen. Enter the new name of the program to be copied. In the above
example, use Sample 2. When completed, touch the OK button. The next screen will look very similar
to the Select Program screen. Select the program location number where you would like the modified
Copying a Program
Method 1
Method 2
SAMPLE 1 Porcelain
Low Temp (C)
Preheat (mm:ss)
Heat Rate (C/min)
Vac Level (cmHg)
High Temp (C)
Vac Hold (mm:ss)
Hold Time (mm:ss)
2ndHold Temp (C)
2nd Hold Time (mm:ss)
Cool Time (mm:ss)
Start Vac (C)
Release Vac (C)
1 2
3 4
5 6
7 8
9 0
05:00
60
7 73
890
450
0
00:00
03:00
550
01:30
00:00
880
Cancel Save Copy Move