Iberspa Hotel Spa, Руководство пользователя

Страница: 28 / 37

30
6. MAINTENANCE
Our hot tubs are made with the highest-quality and most durable materials available.
Proper care and maintenance will ensure the long service life of your hot tub and its
components.
6.1. Notes on maintenance work
• Before performing any electrical or mechanical maintenance work, make sure that
the machine has been disconnected from the power supply and that the start-up
devices have been not locked out.
• Do not handle the equipment with a wet body or feet.
• You must disconnect the power supply before performing any work on the hot tub
(residual-current device in OFF position or disconnect the cable from the mains).
•
This system cannot be connected to a simple plug.
• It requires a suitable electrical installation. This should be done by a qualified person,
following the electrical safety regulations applicable in each country.
• The hot tub's power supply must always be protected by a highly sensitive residual-
current device. We recommend a 30mA residual-current device.
•
Earthing is essential. The building's earth circuit must always be in a perfect condition
to guarantee the safety of the hot tub user. If in doubt, get a suitably qualified
person to check your earth circuit. The manufacturer will not be liable for any injury
and/or damage caused by inadequate maintenance of the earth circuit.
•
Use a cable with a cross-sectional area that is suitable for the hot tub's power and
the distance to the electrical panel.
• Always follow the instructions in chapter: 2. Precautions and preventive measures.
• Do not attempt to access any electrical component if you are not technically trained.
•
Never access the electrical components if you have wet feet.
• The building's electrical system must have a mechanism to disconnect the hot tub
from the mains supply, in accordance with the current regulations.
6.2. Acrylic care
Easy care for an attractive surface:
• Use common general purpose cleaners. For normal care and cleaning, use a soft
cloth or sponge with a little soap and water. Rinse well and dry with a clean, dry cloth.
• Never use abrasive cleaners.
•
Do not allow the acrylic surface to come into contact with ketones or esters such as
acetone, acetates (such as nail varnish remover, nail varnish or dry cleaning
substances) or any organic solvent with chlorine, varnishes, petrol, aromatic
solvents, etc.
•
Remove dust, mud and dry dirt with a soft damp cloth.