28
Configuration procedure:
•
Select "Hidden button" then hold down
for 3 seconds. The control panel will
display the cycle's duration as
dx
(where
x
is the duration in hours).
•
Select the duration with the / buttons within 5 seconds.
•
Confirm the selected value with
. Once confirmed, the new value is saved and
the next parameter is displayed.
•
The control panel shows the delay until start-up as
sy
(where
y
is the delay
expressed in hours)
•
Select the value with the / buttons within 5 seconds.
•
Confirm and save the new start-up time by simply pressing the
button.
The controller leaves parameter setting mode if the keypad remains inactive for
more than 5 seconds.
After a restart (power on), filtration will begin after the delay selected with the sy
parameter.
5.7.
Smart winter mode (SWM)
With this function installed, the functions (massage and filtration) are activated
regularly to prevent the water-carrying parts from freezing. This function starts
automatically if the temperature detected by the water probe is
≤
7°C.
If smart winter mode is activated, filtration is stopped and then resumed 1 minute
after SWM ends.
Activation of functions: The massage pump is activated for 1 minute. If it is not yet
running, the filtration pump is activated while the other functions remain activated.
The message "ICE" appears on the screen while this function is underway. If smart
winter mode is activated, this system will not allow any other function to be enabled.
However, if there is an active function, this mode will be disabled and, if it is still
required, it will start 15 minutes after the active function is disabled.
5.8.
Massage
This has an ON/OFF control. When you press the
button the massage pump
comes on (lit in blue) and if you press it again it is turned off (lit in white).
5.9.
Water temperature control
Every 30 minutes, the filtration pump is activated for 30 seconds to read the
Содержание Hotel Spa
Страница 4: ...6 ...
Страница 37: ...39 ENG 10 EVIDENCE OF CONFORMITY ...