iBell EP82-58, Руководство оператора

Страница: 12 / 18

11
IBL EP82-58
I
I Drum
II Drum Cover

It is important that the blade sits flush with the inside flank of
the gauge plate
, the planer blade locating lugs sit in the blade
groove and the heel of the adjusting plate is flush with the back
side of the gauge base.
Check this alignment carefully to ensure uniform cutting.

Slip the heel of the adjusting plate into the groove of the drum.
Set the drum cover over the adjusting /set plate and screw in the
three bolts so that a gap exists between the drum and the set
plate to slide the mini planer blade into position. The blade will
be positioned by the planer blade locating lugs on the set plate.
.

The blade's lengthwise adjustment will need to be manually
positioned so that the blade ends are clear & equidistant from
the housing on one side and the metal bracket on the other.
.

Tighten the three bolts
(with the socket wrench provided)
and rotate
the drum to check clearances between the blade ends and the
tool body.
.
II
III
IV
V
III Planer blades
IV Adjusting Plate
VI
III
VII
VIII
II
IV
II
V
II
V Set Plate
VI Gauge Base
VII Inside Flank
VIII Locating Lugs