iBell EP82-58, Руководство оператора

Страница: 11 / 18

10
IBL EP82-58
REMOVING OR INSTALLING PLANER BLADES
NOTE:
The direction in which the cutting blade rotates has
to be the same as the direction of the arrow marked.
WARNING!
Disconnect plug from power supply before
making any adjustments to the tool.

To remove the blades on the drum, unscrew the three installation
bolts with the socket wrench provided. The drum cover comes off
together with the blades.

To install the blades, loosely attach the adjusting plate to the set
plate with the screws and set the planer blade on the gauge base
so that the cutting edge of the blade is perfectly flush with the
inside flank of the gauge plate.
(Refer the illustrations provided on the next page)

Set the adjusting plate/set plate on the gauge base so that the
planer blade locating lugs on the set plate rest in the planer blade
groove, then press in the heel of the adjusting plate flush with the
back side of the gauge base and tighten the screws.
Blade
Blade installation is based on the
direction of rotation marked.