iBell EP82-58, Руководство оператора

Страница: 6 / 18

5

Keep your hands away from the cutting area and the blade.
Hold the planer by insulated gripping surfaces only & on the
motor housing
. Keep the handle of the planer dry & clean. Keep
your body positioned to either side of the blade, but not in line
with the blade.

Use clamps or other practical way to secure and support the
work piece to a stable platform
. Do not hold the material to be
worked in your hands , your legs or feet, it’s important that the
material be adequately clamped down , reducing the contact with
the body and the possibility of losing control.

Do not operate the planer on surfaces under which there might
be electrical wires, and water or pipes
. The contact with wires or
water might cause electrical shocks.

Do not overload the planer , use it only for the adequate purpose.
Using the planer for purposes that are different from what
indicated in this manual might lead to hazardous situations.

Wait for the blade to come to a complete stop , there is a period
of inertial movement before the tool stops after turned OFF.

The use of this tool create and/or spread dust that may cause
serious and permanent respiratory injuries
. To reduce the
exposure to these substances, work in well-ventilated places and
always
use dust mask.

Keep bystanders a safe distance away from work area. Anyone
entering the work area must wear personal protective equipment.

Make sure the cutting blade is not contacting the work piece
before the switch is turned ON
. Wait until the cutting blade
attains full speed before cutting. Stop operation immediately if you
notice anything abnormal.
Wear ear protectors.
Exposure to noise can cause hearing loss.
Wear safety goggles or eye protection when using this power
tool. For additional protection against electric shock, be sure to
wear rubber gloves.
ELECTRIC PLANER SAFETY WARNINGS
IBL EP82-58