IBC Water AST0922-940, Инструкция по установке и эксплуатации

Страница: 5 / 30

AST0922-940 Page
5
INSTALLATION
OF
IBC CABINET WATER SOFTENER UNIT
FITTED WITH MODEL 255 VALVE/940 CONTROL
Check the equipment upon arrival for damage or shortages and report same to our Office or
Agent before starting.
Position the Softener Cabinet on a firm foundation, preferably concrete, with sufficient space
for operation and maintenance.
STEP 1 Connect inlet, outlet pipes and drain line to control valve as per Instruction
Booklet (page 5, figure 3).
Note : The softener is supplied with the Autotrol Series 156 Bypass Valve as
standard.
STEP 2 Remove lid from brine tank. Then connect brine overflow drain line to waste
trap.
STEP 3 Refer to Instruction Booklet for start up procedure (page 6 “Placing conditioner
into Service”).
STEP 4 Load recommended quantity of water softener salt into brine tank and replace
lid (refer to Table 3 “Brine Tank Salt Loading”).
Table 3
MODEL RESIN LITRES BRINE TANK - SALT
LOADING KG
AST0922-940 22 50