35
clients send outgoing packets. Auto Reconnect (Always-on) is the device will link with
ISP until the connection is established. Manually mode is the device will not make the
link until someone clicks the connect-button in the Status-page.
6.
Maximum Transmission Unit (MTU)
: Most ISP offers MTU value to users. The
default MTU value is 0 (auto).
7.
MPPE (Microsoft Point-to-Point Encryption):
enable or disable this function.
8.
Multicast:
you may enable as auto mode or select by IGMP v1, IGMP v2, IGMP v3.
9.
IGMP Snooping:
enable or disable IGMP snooping function.
10.
VLAN TAG:
you may input the value of VLAN Tag by your ISP setting. (Range :
1~4094)
E. L2TP
1.
IP Mode
: Please check the IP mode your ISP assigned, and s
elect “Static IP Address”
or “Dynamic IP Address”.
2.
My IP Address
and
My Subnet Mask
: The private IP address and subnet mask your
ISP assigned to you.
3.
Gateway IP
and
Server IP Address/Name
: The IP address of the L2TP server and
designated Gateway provided by your ISP.
Содержание iB-WRC300N
