iBall Baton iB-WRC300N, Руководство пользователя

Страница: 58 / 70

58
2. Get Community : The community of Get Request is that this device will respond.
3. Set Community : The community of Set Request is that this device will accept.
4. IP 1, IP 2, IP 3, and IP 4 : Enter the IP addresses of your SNMP Management PCs.
User have to configure where this device should send SNMP Trap message.
5. SNMP Version : Select proper SNMP Version that your SNMP Management software
supports.
6. WAN Access IP Address : If you want to limit the remote SNMP access to specific
computer, please enter the PC’s IP address. The default value is 0.0.0.0, and it means
that any Internet connected computer can get some information of the device with
SNMP protocol.
Afterwards, click on “Save” to store your settings or click “Undo” to give up the changes.
3.2.4.2.
TR-069
1. TR-069 : Disable or enable the TR-069 settings.
2. ACS setting : you may add ACS URL/ Username/ Password.
3. CPE setting : you may add CPE connection request port/ username /password.
4. Inform setting : you may enable/disable the interval of informing CPE.
5. Interval: you may input seconds for every interval.
Note: The TR-069 ISP feature is currently not used in India