29
assigned to you. For security, this field appears blank. If you don't want to
change the password, leave it blank.
3.
Primary DNS/ Secondary DNS:
input the Primary/Secondary DNS if
necessary.
4.
Connection Control:
you can choose Connect-on-demand, Auto Reconnect
(always-on) and Manually.
5.
PPPoE Service name and assigned IP address:
input the value if
necessary.
6.
MTU:
put all information here.
7.
NAT disable:
If you enable this option, it will act with a non-NAT function.
8.
Bridge mode:
If you enable this option, it will act with a bridge mode for ADSL
function.
9.
Data Encapsulation:
Vc-MUX and LLC, these two options depend on your
ISP setting.
10.
VPI and VCI, Schedule Type:
these values depend on your ISP setting.
11.
Schedule type
: UBR / CBR / VBR / GFR, depend on your ISP setting.
12.
Multicast:
you may enable as auto mode or select by IGMP v1, IGMP v2, and
IGMP v3.
13.
IGMP Snooping:
enable or disable IGMP snooping function.
14.
VLAN TAG:
you may input the value of VLAN Tag by your ISP setting.
(Range : 1~4094)
Содержание iB-WRC300N
